Detailed information
 |
|
|
 |
| Integrated Board |
|
|
|
|
|
Key Features
1. Dual socket R (LGA 2011) supports
Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
2. Up to 1.5TB ECC DDR3, up to
1866MHz; 24x DIMM slots
3. 2 PCI-E 3.0 (x8) Low-profile,
2 PCI-E 3.0 (x16) & 2 PCI-E 3.0 (x8)
Full-height slots (see below for details)
4. Intel i350 Dual port GbE & Intel X540
Dual port 10GBase-T Controllers
5. 10x 3.5" Hot-swap SAS/SATA HDD
Bays
6. 920W Redundant Power Supplies
Platinum Level (94%)
|
|
| |
 |
|
|
|
|
|
 |
| SYS-6027R-N3RFT+ |
- SuperServer 6027R-N3RFT+ (Black)
|
| |
|
Super X9DRW-3TF+ |
| |
|
| CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP)
|
| Note |
† BIOS version 3.0 or above is required |
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 24x 240-pin DDR3 DIMM slots
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SAS |
- SAS from C606
- RAID 0, 1, 10 support
|
| SATA |
- Via Cable for SATA controller
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® X540 Dual Port 10GBase-T
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
|
| SAS |
|
| LAN |
- 2x RJ45 10GBase-T ports
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 7x USB 2.0 ports total
(2x rear + 4x via header + 1x Type A)
|
| VGA |
|
| Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
|
| PCI-Express |
- 1 PCI-E 3.0 (x16) Full-height (16.5" length)
- 1 PCI-E 3.0 (x16) Full-height (10" length)
- 1 PCI-E 3.0 (x8) Full-height (16.5" length)
- 1 PCI-E 3.0 (x8) Full-height (6.6" length)
- 2 PCI-E 3.0 (x8) Low-profile (6.6" length)
- UIO AOC Compatibility Matrix
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| |
|
| Hot-swap |
- 10x 3.5" Hot-swap SAS / SATA HDD trays (connected to onboard storage controller - 2x SATA3, 8x SAS)
|
| |
|
| DVD-ROM |
- Slim DVD-ROM drive (optional)
|
| |
|
| 1x SAS2 / SATA backplane |
| |
|
| Fans |
- 4x 8cm heavy duty PWM fans
|
| |
|
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
| Certification |
  Platinum Certified
[ Test Report ] |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
5°C to 35°C (41°F to 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X9DRW-3TF+
CSE-829BTQ-R920WB |
1
1 |
Super X9DRW-3TF+ Motherboard
2U Chassis |
| Backplane |
BPN-SAS-829BTQ |
1 |
10-port 2U CSE-829 TQ (W/ AMI 9072 SGPIO support) backplane, support up to 10x 3.5-inch SAS/SATA HDD |
| Cable 1 |
CBL-0388L-01 |
2 |
MINI SAS-4 SATA (RA),INT,75/75/90/90CM,75CM SB,30AWG |
| Cable 2 |
CBL-0157L-01 |
1 |
CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,60CM,28AWG |
| Cable 3 |
CBL-0226L |
2 |
SATA,INT,ROUND,ST-RA,43CM,26AWG |
| Riser Card |
RSC-R2UW+-2E16-2E8 |
1 |
RSC-R2UW+-2E16-2E8 |
| Riser Card |
RSC-R2UW-2E8R |
1 |
2U RHS WIO Riser card with two PCI-E x8 slots |
| Heatsink / Retention |
SNK-P0048PSC |
2 |
2U Passive CPU Heat Sink for X9, X10 2U WIO/WIO+ Series Servers |
| Rail Set |
MCP-290-00053-0N |
1 set |
Rail set, quick/quick, default for 2,3U 17.2"W
|
|
|
|
