|
|
|
|
|
SYS-6027R-72RFTP+ |
- SuperServer 6027R-72RFTP+ (Black)
|
|
|
Super X9DRW-7TPF+ |
|
|
CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family† (up to 135W TDP)
|
Note |
† BIOS version 3.0 or above is required |
Cache |
|
System Bus |
|
|
|
Memory Capacity |
- 24x 240-pin DDR3 DIMM slots
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
|
Memory Type |
- 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
|
Memory Voltage |
|
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset |
|
SAS |
- SAS2 from Broadcom 2208 (1GB cache)
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
- Supports up to 16 drives
|
SATA |
- Via Cable for SATA controller
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® 82599 Dual Port 10G SFP+
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10G SFP+, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics |
|
|
|
Serial ATA |
- 2x SATA 3.0 ports (6Gbps)
|
SAS |
|
LAN |
- 2x SFP+ 10GbE LAN ports
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB |
- 5x USB 2.0 ports total
(2x rear + 2x via header + 1x Type A)
|
VGA |
|
Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header
|
|
|
|
|
Form Factor |
|
Model |
|
|
|
Width |
|
Height |
|
Depth |
|
Gross Weight |
|
Available Colors |
|
|
|
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
|
|
PCI-Express |
- Left: 1 PCI-E 3.0 (x16), 2 PCI-E 3.0 (x8) Full-height
- Right: 2 PCI-E 3.0 (x8) Low-profile
- Please refer here for AOC Support details
- UIO AOC Compatibility Matrix
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
|
|
Hot-swap |
- 10x 3.5" Hot-swap SAS / SATA HDD trays (connected to onboard storage controller - 2x SATA3, 8x SAS)
|
|
|
DVD-ROM |
- Slim DVD-ROM drive (optional)
|
|
|
1x SAS2 / SATA backplane |
|
|
Fans |
- 4x 8cm heavy duty PWM fans
|
|
|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C |
AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
DC Output |
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
Certification |
Platinum Certified [ Test Report ] |
|
|
BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
|
RoHS |
|
Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
|
|
|
|
|
|
Part Number |
Qty |
Description |
Motherboard / Chassis |
MBD-X9DRW-7TPF+
CSE-829BTQ-R920WB |
1
1 |
Super X9DRW-7TPF+ Motherboard
2U Chassis |
Backplane |
BPN-SAS-829BTQ |
1 |
10-port 2U CSE-829 TQ (W/ AMI 9072 SGPIO support) backplane, support up to 10x 3.5-inch SAS/SATA HDD |
Cable 1 |
CBL-0157L-01 |
1 |
CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,60CM,28AWG |
Cable 2 |
CBL-0287L-01 |
1 |
MINI SAS-4 SATA,INT,RA 43/43CM & ST 33/33CM,43CM SB,30AWG |
Cable 3 |
CBL-CDAT-0527 |
1 |
CBL,LED,829B with X9DRW-7TPF+,2X2 TO 2X2,P2.54,15CM,26AWG |
Cable 4 |
CBL-0230L |
2 |
SATA,INT,ROUND,ST-RA,65CM,26AWG |
Cable 5 |
CBL-0278L-01 |
1 |
MINI SAS-4 SATA (RA),INT,64/54/44/34CM,64CM SB,30AWG |
Riser Card |
RSC-R2UW-2E8E16 |
1 |
RSC-R2UW-2E8E16 |
Riser Card |
RSC-R2UW-2E8R |
1 |
2U RHS WIO Riser card with two PCI-E x8 slots |
Heatsink / Retention |
SNK-P0048PSC |
2 |
2U Passive CPU Heat Sink for X9, X10 2U WIO/WIO+ Series Servers |
Rail Set |
MCP-290-00053-0N |
1 set |
Rail set, quick/quick, default for 2,3U 17.2"W
|
|
|
|