| 
|  |  
 
|  |  
| SYS-5018R-WR | 
SuperServer 5018R-WR (Black) |  
|  |  
 
|  |  
| Super X10SRW-F
 |  
|  |  
 
|  |  
| CPU | 
Intel® Xeon® processor E5-2600 v4†/ v3, E5-1600 v4†/ v3 family (up to 145W TDP **)Single Socket R3 (LGA 2011) |  
| Core / Cache | 
Up to 22 Cores† / Up to 55MB† Cache |  
| Note | † BIOS version 2.0 or above is required |  
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support |  
|  |  
 
|  |  
| Memory Capacity | 
8x 288-pin DDR4 DIMM slotsUp to 1TB ECC 3DS LRDIMMUp to 512GB ECC LRDIMMUp to 256GB ECC RDIMM |  
| Memory Type | 
2400†/ 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |  
| DIMM Sizes | 
3DS LRDIMM: 128GBLRDIMM: 64GB, 32GBRDIMM: 32GB, 16GB, 8GB, 4GB |  
| Memory Voltage |  |  
| Error Detection | 
Corrects single-bit errorsDetects double-bit errors (using ECC memory) |  
|  |  
 
|  |  
| Chipset |  |  
| SATA | 
SATA3 (6Gbps) via C612 controllerRAID 0, 1, 5, 10 support |  
| IPMI | 
Support for Intelligent Platform Management Interface v.2.0IPMI 2.0 with virtual media over LAN and KVM-over-LAN supportASPEED AST2400 BMC |  
| Network Controllers | 
Intel® i350-AM2 Dual Port Gigabit EthernetVirtual Machine Device Queues reduce I/O overheadSupports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |  
| Video |  |  
|  |  
 
|  |  
| SATA |  |  
| LAN | 
2x RJ45 Gigabit Ethernet LAN ports1x RJ45 Dedicated IPMI LAN port |  
| USB | 
2x USB 3.0 ports (2 rear)2x USB 2.0 ports (2 rear) |  
| Video |  |  
| Serial Port / Header | 
1x Fast UART 16550 serial port1x internal header |  
| DOM | 
2x SuperDOM (Disk on Module) ports |  
|  |  
 
|  |  
| Voltage | 
Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. |  
| FAN | 
Total of 6 fan headers supporting up to 6 fans6 fans with tachometer status monitoringStatus monitor for speed controlStatus monitor for on/off controlLow noise fan speed controlPulse Width Modulated (PWM) fan connectors |  
| Temperature | 
Monitoring for CPU and chassis environmentCPU thermal trip supportI2C temperature sensing logicThermal Monitor 2 (TM2) supportPECI |  
| LED | 
CPU / System Overheat LEDSuspend static indicator LEDUID/Remote UID |  
| Other Features | 
Chassis intrusion detectionChassis intrusion headerChipkill supportRoHS, Halogen Free |  |  | 
|  |  
 
|  |  
| Form Factor |  |  
| Model |  |  
|  |  
 
|  |  
| Height |  |  
| Width |  |  
| Depth |  |  
| Weight | 
Net Weight: 23.5 lbs (10.7 kg)Gross Weight: 36 lbs (16.3 kg) |  
| Available Colors |  |  
|  |  
 
|  |  
| Buttons | 
Power On/Off buttonSystem Reset button |  
| LEDs | 
Power LEDHard drive activity LED2x Network activity LEDsSystem Overheat LED |  
|  |  
 
|  |  
| PCI-Express | 
Total of 3 Add-on card slots:2x PCI-E 3.0 x16 (FH, FL) slots1x PCI-E 3.0 x8 (LP, HL) slot |  
|  |  
 
|  |  
| Hot-swap | 
4x 3.5" Hot-swap drive bays |  
|  |  
 
|  |  
| Optional | 
1x slim DVD-ROM drive bay |  
|  |  
 
|  |  
| SAS/SATA HDD Backplane (SAS support requires optional SAS controller)
 |  
|  |  
 
|  |  
| Fans | 
4x 40x28mm 4-pin PWM Cooling Fans |  
|  |  
 
| 500W Redundant Power Supplies with PMBus |  
| Total Output Power |  |  
| Dimension (W x H x L)
 |  |  
| Input | 
100-240Vac, 50-60Hz, 6.1-2.6A |  
| +12V |  |  
| +5Vsb |  |  
| Output Type | 
Gold Finger Connector Mating with Molex 45984-4343 |  
| With Power Distributor | 
+5V: 25A+3.3V: 12A-12V: 0.6A |  
| Certification |  UL/cUL/CB/CE/BSMI/CCC
 Platinum Certified
 [ Test Report ]
 |  
|  |  
 
|  |  
| BIOS Type | 
8MB SPI Flash EEPROM with AMI BIOS |  
| BIOS Features | 
DMI 2.3PCI 2.3ACPI 1.0 / 2.0USB Keyboard supportSMBIOS 2.3 |  
|  |  
 
|  |  
| RoHS |  |  
| Environmental Spec. | 
Operating Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
 |  |