Detailed information
End of Life product, the price is only informative, we've prepared these alternatives for you:
Supermicro SYS-1028U-E1CR4+
or
Supermicro SYS-1028U-TN10RT+
 |
|
|
 |
| Integrated Board |
|
|
|
|
|
Key Features
1. Single socket H2 (LGA 1155) supports
Intel® Xeon® E3-1200 & v2 series,
2nd Gen Core i3 processors* 2. Intel® C202 PCH Chipset 3. 4x 3.5" Hot-swap SATA2 HDDs 4. 1x PCI-E 3.0* x8 Full-height slot 5. Up to 32GB DDR3 ECC 1333MHz /
1600MHz* UDIMMs in 4 sockets 6. Intel® 82579LM and 82574L,
2x Gigabit Ethernet LAN ports 7. IPMI 2.0 on Dedicated LAN port 8. 6x SATA 2.0 with RAID 0, 1, 5, 10 9. 400W Redundant Power Supplies 10. Disk-on-module (DOM) power
connector |
|
| Available Colors: |
Black  |
 |
|
 |
|
|
|
|
|
 |
| SYS-5017C-MTRF |
- SuperServer 5017C-MTRF (Black)
|
| |
|
Super X9SCL-F |
| |
|
| CPU |
- Intel® Xeon® processor E3-1200 & v2 series, Intel® 2nd Gen and 3rd Gen Core i3, Intel® Pentium® and Celeron processors * ^
- Socket H2 (LGA 1155)
|
| |
|
| Memory Capacity |
- 4x 240-pin DDR3 DIMM slots
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
|
| Memory Type |
- 1600*/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
|
| Chipset |
|
| SATA |
- 6x SATA 2.0 (3Gbps) w/ RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® 82579LM and Intel® 82574L,
2x Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA |
|
| Super I/O |
|
| Clock Generator |
|
| |
|
| Serial ATA |
- 4 SATA ports
- 4 SATA hard drives supported
|
| LAN |
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB rear ports
- 1x USB Type-A
- 6x USB ports via header
- Total 9 USB 2.0 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1x Fast UART 16550 serial port
- 1x internal header
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| Ports |
- 2x USB ports
- 1x Serial COM Port
|
| |
|
| PCI-Express |
- 1x PCI-E 3.0* x8 Full-height slot
|
| |
|
| Hot-swap |
- 4x 3.5" Hot-swap SATA2 HDDs w/ RAID
|
| |
|
| 1U SATA HDD Backplane |
| |
|
| Fans |
- 4x 4cm 12,500 RPM PWM fans
|
| |
| 400W Redundant Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC |
| AC Input |
|
| DC Output |
- +5V standby: 3A
- +12V: 33A
|
DC Output
With Power Distributor |
- +5V: 25A
- +3.3V: 25A
- -12V: 0.6A
|
| Certification |
Gold Certified |
| |
|
| BIOS Type |
- 8Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
| |
Part Number |
Qty |
Description |
| Motherboard / Chassis |
MBD-X9SCL-F
CSE-813MTQ-R400CB |
1
1 |
Super X9SCL-F Motherboard
1U Chassis |
| Backplane |
BPN-SAS-815TQ |
1 |
4-port 1U TQ backplane (W/ enclosure management), support up to 4x 3.5-inch SAS/SATA HDD |
| Cable 1 |
CBL-0157L |
1 |
CBL,SGPIO,2X4F TO 2X4F,P2.54,RIBBON IN RND TUBE,40CM,28AWG |
| Cable 2 |
CBL-0186L |
1 |
SATA,INT,ROUND,SET OF 4,ST-RA 56/45.5/35/23CM,26AWG |
| Riser Card |
RSC-RR1U-E8 |
1 |
RSC-RR1U-E8 |
| Heatsink / Retention |
SNK-P0046P |
1 |
1U PASSIVE CPU HS FOR INTEL LGA1156 |
| Mounting Rails |
CSE-PT52L |
1 |
Rail kit |
|
|
|
