 |
|
|
|
 |
| SYS-1028U-TN10RT+ |
- SuperServer 1028U-TN10RT+ (Black)
|
| |
|
Super X10DRU-i+ |
| |
|
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 160W TDP) *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
|
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
- 2666/2400 ECC DDR4 NVDIMM
|
| DIMM Sizes |
- 64GB, 32GB, 16GB, 8GB, 4GB
- NVDIMM: 16GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SATA |
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Connectivity |
- 2 10GBase-T ports via AOC-URN6-i2XT
- Intel® X540 10GBase-T
- 1 Realtek RTL8211E PHY (dedicated IPMI)
|
| Graphics |
|
| |
|
| NVMe/SAS |
- 6 NVMe ports (NVMe from CPU 1)
- 4 NVMe/SAS3** Hybrid ports (NVMe from CPU 2)
|
| LAN |
- 2 RJ45 10GBase-T ports
- 1 RJ45 Dedicated IPMI LAN port
|
| USB |
- 5 USB 3.0 ports
(2 rear, 2 front, 1 Type A)
|
| Video |
|
| Serial Port |
|
| DOM |
- 2 SuperDOM (Disk on Module) ports
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| |
|
| Software |
- SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- NMI
- SUM and SSM
- Optional IPMI 1.5 / 2.0
|
| Power Configurations |
- ACPI Power Management
- Power-on mode for AC power recovery
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Color |
|
| |
|
| Buttons |
- Power On/Off button
- System UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- UID LED
|
| |
|
| PCI-Express |
-
- 3 PCI-E 3.0 x8 slots
(2 Full-height 10.5" L; 1 Low-profile)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| |
|
| Hot-swap |
- 10x 2.5" Hot-swap drive bays
- 6 NVMe ports (NVMe from CPU 1)
- 4 NVMe/SAS3 hybrid ports for optional SAS3/SATA3** (NVMe from CPU 2)
** Note: SAS3/SATA3 support requires additional parts in optional parts list
|
|
| |
|
| Fans |
- 8 heavy duty fans with optimal fan speed control
|
| Air Shroud |
|
| |
| 1000W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
- 200-240Vdc / 7 - 5A (for CCC only)
|
| +12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
- Max: 83A / Min: 0A (200-240Vdc)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| Voltage |
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
| FAN |
- 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature |
- Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED |
- Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
| Other Features |
- 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DRU-i+
CSE-119UAC2-R750 |
1
1 |
Super X10DRU-i+ Motherboard
CSE-119UAC2-R750 Chassis |
| Air Shroud |
MCP-310-81903-0B |
1 |
Mylar air shroud set for SC819U,119U (X10DRU+),HF |
| Add-on Card / Module |
AOC-URN6-I2XT-P |
1 |
AOC-URN6-I2XT |
| Backplane |
BPN-SAS3-116A-N10 |
1 |
10-port 1U SAS3 12Gbps Hybrid backplane, support up to 10x 2.5-inch NVMe storage devices, 4 of them are SAS3/SATA3 drives compatible. |
| Cable 1 |
CBL-PWEX-0780 |
1 |
PWYCB,2X4F/GPU-White to TWO 2X2F,P4.2, (5,12V),40/40CM,18AWG,RoHS |
| Cable 2 |
CBL-PWEX-0781 |
1 |
PWYCB,2X4F/GPU-White to TWO 2X2F,P4.2, (5,12V),65/65CM,18AWG,RoHS |
| Cable 3 |
CBL-SAST-0818 |
5 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 55CM,34AWG |
| Cable 4 |
CBL-SAST-0819 |
3 |
OCuLink v 1.0,INT,PCIe NVMe SSD, 65CM,34AWG,RoHS/REACH |
| Cable 5 |
CBL-SAST-0820 |
2 |
OCuLink v. 1.0,INT,PCIe NVMe SSD, 85CM,34AWG,RoHS/REACH |
| Parts |
MCP-130-81901-0N |
1 |
Oculink cable connection plastic holder for AOC-URN6-i2XT |
| Parts |
MCP-150-00009-0B |
1 |
Internal AOC rubber support for SC819U, 119U |
| Manual |
MNL-1812-QRG |
1 |
QRG for SYS-1028U-TN10RT+ |
| Riser Card |
RSC-R1UW-E8R |
1 |
1U RHS WIO Riser card with one PCI-E x8 slot |
| Riser Card |
RSC-UN4-88 |
1 |
RSC-UN4-88 |
| Heatsink / Retention |
SNK-P0057PSU |
2 |
1U Passive CPU Heat Sink for X10 1U 24-DIMM Ultra and Super Blade Series Servers,RoHS/REACH |
| Power Supply |
PWS-1K02A-1R |
2 |
1U 1000W Redundant Power Supply 73.5mm width Titanium Level,RoHS/REACH |
| FAN 1 |
FAN-0101L4 |
8 |
40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 |
| Rear Window |
MCP-240-81909-0N |
1 |
Ultra I/O Rear Window for SC819U, 119U-T tool-less chassis(i2XT) |
|
|
|
