Detailed information
End of Life product, the price is only informative, we’ve prepared this alternatives for you.
|
|
 |
|
|
| |
| SYS-1028TP-DC1TR |
- SuperServer 1028TP-DC1TR (Black)
|
| |
| |
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| |
| |
| Memory Capacity |
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB† ECC 3DS LRDIMM, 512GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
| |
| Chipset |
|
| SAS |
- Broadcom 3108 SAS3 (12Gbps) controller;
RAID 0, 1, 10, 5, 6 support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- Intel® X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics |
|
| |
| |
| SAS |
|
| LAN |
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
|
| VGA |
|
| Serial Port / Header |
- 1x Fast UART 16550 port / 1 Header (internal)
|
| Others |
- 1x SATADOM support on the motherboard
|
|
|
| |
| |
| Width |
|
| Height |
|
| Depth |
|
| Weight |
- Gross Weight: 48.1 lbs (21.9 kg)
- Net Weight: 33.5 lbs (15.2 kg)
|
| Package (HxWxD) |
- 8" (203mm) x 29.6" (752mm) x 38.4" (975mm)
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- UID button/LED
|
| LEDs |
- Power status LED
- Network activity LED
- Universal Information (UID) LED
|
| |
| |
| PCI-Express |
- 1x PCI-E 3.0 x16 Low-profile slot
|
| |
| |
| Hot-swap |
- 4x 2.5" Hot-swap SAS3 drive bays
|
| |
| |
| Fans |
- 3x heavy duty counter rotating fans with air shroud and optimal fan speed control
|
| |
| 1000W 1U Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 9-7.5A / 50-60Hz
- 200-240Vac / 6-5A / 50-60Hz
|
| +12V |
- Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
|
| +5Vsb |
|
| Output Type |
- Gold Finger Connector (16 Power Pin, 14 Signal Pin)
|
| Certification |
  Titanium Level
[ Test Report ] |
| |
| |
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
| |
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
