|
|
 |
Key Features
1. Dual socket R3 (LGA 2011) supports
Intel® Xeon® processor E5-2600
v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 3TB† ECC 3DS LRDIMM , up to
DDR4- 2400†MHz ; 24x DIMM slots
3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8
4. SIOM for flexible networking options
5. 24x 3.5" Hot-swap SAS3/SATA3 drive
bays; optional 2x 2.5" Hot-swap rear
SATA drive bays
6. Onboard Broadcom 3108 SAS3 Hardware RAID
RAID 0, 1, 5, 6, 10, 50, 60
7. Server remote management: IPMI 2.0
/ KVM over LAN / Media over LAN
8. 5x 8cm hot-swap redundant PWM fans
9. 1600W Redundant Power Supplies
Titanium Level (96%)
|
|
|
Due to the complexity of integration, this product is sold as a completely assembled system only (with minimum 2 CPUs, 2 DIMMs, 12 HDDs and 1 NIC or SIOM card).
|
|
 |
|
|
|
|
|
 |
| SSG-6028R-E1CR24N |
- SuperServer 6028R-E1CR24N (Black)
|
| |
|
Super X10DSC+ |
| |
|
| CPU |
- Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache |
- Up to 22 Cores† / Up to 55MB† Cache
|
| System Bus |
|
| Note |
† BIOS version 2.0 or above is required |
| Note |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
|
| Memory Capacity |
- 24x 288-pin DDR4 DIMM slots
- Up to 3TB† ECC 3DS LRDIMM, 512GB ECC RDIMM
|
| Memory Type |
- 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
|
| DIMM Sizes |
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
|
| |
|
| Chipset |
|
| SAS3 |
- Broadcom 3108 SAS3 onboard
- Hardware RAID 0, 1, 5, 6, 10, 50, 60
|
| SATA |
- SATA3 (6Gbps); RAID 0, 1, 5, 10
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
|
| Network Controllers |
- SIOM support for flexible networking options
|
| Graphics |
|
| |
|
| LAN |
- LAN ports via SIOM Add-On-Card
|
| USB |
- 3 USB 3.0 ports (2 rear + 1 Type A)
|
| Video |
|
| Serial Port / Header |
- 1 Fast UART 16550 port / 1 Header
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Width |
|
| Height |
|
| Depth |
- 34" (863.6mm)
- With Cable Management Arm Installed:
41" (1041.4mm)
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
|
| PCI-Express |
- 2 PCI-E 3.0 x16 slots
- 1 PCI-E 3.0 x8 slot
|
| |
|
| Hot-swap |
- 24x 3.5" Hot-swap SAS3/SATA3 drive bays
- Optional 2x 2.5" rear Hot-swap SATA drive bays
|
| |
|
| Two 12 port SAS3 12G expander backplanes, each supporting up to 12x 2.5" SAS3 drives |
| |
|
| Fans |
- 5x 8cm hot-swap redundant PWM cooling fans
|
| |
| 1600W Redundant Power Supplies with PMBus |
| Total Output Power |
|
Dimension
(W x H x L) |
|
| Input |
- 100-127Vac / 13 - 9A / 50-60Hz
- 200-240Vac / 10 - 8A / 50-60Hz
|
| +12V |
- Max: 83.3A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
| 12Vsb |
|
| Output Type |
- 25 Pairs Gold Finger Connector
|
| Certification |
  UL/cUL/CB/BSMI/CE/CCC
Titanium Level
[ Test Report ] |
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
|
| RoHS |
|
| Environmental Spec. |
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
 |
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| Motherboard / Chassis |
MBD-X10DSC+
CSE-826SE1C4-R1K62 |
1
1 |
Super X10DSC+ Motherboard
2U Chassis |
| Add-on Card / Module |
AOM-S3108M-H8L-P |
1 |
sas3 roc mez for X10dsc |
| Backplane |
BPN-SAS3-826SEL1-N4 |
2 |
12-port 2U Simply-Double SAS3 12Gbps single-expander backplane, support up to 8x 3.5-inch SAS3/SATA3 HDD and 4x NVMe/SAS3/SATA3 storage devices |
| Cable 1 |
CBL-PWEX-0702 |
1 |
PWEX,2X4F/P4.2 TO 1X4F/P5.08/RA,32CM,18AWG,YEL,BLK*2,RED |
| Cable 2 |
CBL-SAST-0835 |
2 |
SLIMLINE SAS to MiniSAS HD, INT, 100CM, 32AWG |
| Cable 3 |
CBL-SAST-0836 |
2 |
MINI SAS HD,INT,SAS3 SSD,48CM,32AWG |
| Parts |
MCP-220-82609-0N |
1 |
Rear 2.5 x 2 Hot swap HDD kit for 216B/826B/417B/846X/847B |
| Heatsink / Retention |
SNK-P0047PS |
2 |
1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB |
| Power Supply |
PWS-1K62A-1R |
2 |
AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH |
| FAN 1 |
FAN-0168L4 |
5 |
80x80x38 mm, 13.5K RPM, Middle Cooling Fan for SC226S Chassis (48-bay) |
| Cable Management Arm |
MCP-290-00086-0N |
1 |
Cable Management Arm for 1U ball bearing Chassis |
| Drive Tray(s) |
MCP-220-00133-0B |
24 |
Black gen 8 hot-swap 3.5" HDD tray
|
|
|
|
