 |
 |
| SSG-2027B-DE2R24L |
- SuperStorage 2027B-DE2R24L (Black)
|
| |
|
2x Super X9DBS-F-2U |
| |
|
| CPU |
- Dual Socket B2 (LGA 1356)
- Intel® Xeon® processor E5-2400 v2
- Up to 95W TDP
|
| Cache |
|
| System Bus |
|
| |
|
| Memory Capacity |
- 6x 240-pin DIMM slots
- Supports up to 192GB DDR3 ECC Registered memory
- Memory Mirroring supported
|
| Memory Type |
- 1866/1600/1333/1066/800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- NVDIMM support. (Not all vendor's NVDIMM are supported. Please contact your sales representative for details)
|
| DIMM Sizes |
- 1GB, 2GB, 4GB , 8GB , 16GB , 32GB
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
| |
|
| Chipset |
|
| SAS/SATA* |
- Broadcom 2308 SAS2 (6Gbps)
|
| SAS2 Expander |
- Scalability through cascading
- 6Gb SAS2/SATA2 HDD support
- Inband SES-2 Enclosure Management
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers |
- Intel® i350 Dual-Port Gigabit Ethernet Controller
- Intel® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
| Graphics |
|
| Super I/O |
|
| Others |
- PCI-E 3.0 x8 node to node/NTB connectivity
- PLX Technology PEX8717; PLX ExpressNIC SDK available from PLX. NDA required
|
| |
|
| PCI-Express |
- 3x PCI-E 3.0 x8 slots (on riser)
|
| |
|
| SAS |
- 1x JBOD expansion port per node
(mini-SAS HD)
|
| LAN |
|
| USB |
- 2x USB rear ports (via KVM cable)
- 1x USB on-board (TypeA)
|
| VGA |
- 1x VGA Port (via KVM cable)
|
| Serial Port / Header |
- 1x console port (via KVM cable); Board to Board serial port connection available for management
|
| |
|
| BIOS Type |
- 16MB SPI Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- PCI 2.3
- ACPI up to 5.0
- USB Keyboard support
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
- Alarm Mute Switch
|
| LEDs |
- Power LED
- Hard Drive Activity LED
- 2x Network Activity LED
- System Overheat LED
- Power Fail LED
|
| |
|
| Hot-swap |
- 24x Hot-swap 2.5" Drive Bays shared between server nodes
- SAS or enterprise SATA HDD only recommended
- SATA drives require Broadcom interposer
|
| |
|
SAS2 dual Expander Backplane, features:
• Scalability through cascading
• 6Gb SAS2/SATA2 HDD support
• Inband SES-2 Enclosure Management
• Redundancy dual ported SAS architecture
• Robust AirMax server node connections (SBB specification) |
| |
|
|
| Fans |
|
| |
| 920W Redundant High-Efficiency Power Supplies w/ Power Distributor, PMBus 1.2, I2C, and PFC |
| AC Input |
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
| DC Output |
- +5V standby: 4A
- +12V: 75A
|
| With Power Distributor |
- +5V: 45A
- +3.3V: 24A
- -12V: 0.6A
|
| Certification |
 Platinum Certified
[ Test Report ] |
| |
|
| CPU |
- Monitors for CPU Cores, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Voltages.
- 5+1-switching voltage regulator
|
| FAN |
- Total of 10 fan headers supporting up to 10 fans
|
| Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 10x fan connectors
- PECI
|
| |
| RoHS |
|
| Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
