Supermicro PIO-2014TP-HTR-NODE

Detailed information

Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system (Per node, minimum 1 CPU, 2 DIMMs, 1 U.2 or M.2 NVMe, 1 AIOM, 1 GPU installed). Add on Cards (AOC) are recommended to be installed by Supermicro due to optimized density of the 2U form factor.
Service: OSNBD3 is highly recommended.

Motherboard (per Node)

Super H12SSG-ANP6

Processor (per Node)
CPU	AMD Ryzen™ Threadripper™ PRO 5000WX/3000WX Series Processor, up to 64 Cores Socket SP3 Supports CPU TDP up to 280W*
Cores	Up to 64 Cores
Chipset	System on Chip (SoC)
Note	* Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization

GPU Support (per Node)

Up to 3 double-width or 6 single-width GPUs

System Memory (per Node)
Memory Capacity	8 DIMM slots Up to 2TB 3DS ECC DDR4-3200MH SDRAM
Memory Type	3200MHz ECC DDR4 SDRAM

On-Board Devices (per Node)
Network	Flexible networking via AIOM
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics & System Management	ASPEED AST2600 BMC

Input / Output (per Node)
SATA	N/A
LAN	Flexible networking provided by AIOM 1 RJ45 1GbE Dedicated IPMI management port
USB	2 USB 3.0 ports (rear)
Video	1 VGA Connector (rear)
Others	1 COM port (header) 1 TPM 2.0 (header)

System BIOS (per Node)
BIOS Type	AMI 256Mb SPI Flash ROM

Management (per Node)
Software	IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor® 5 Watchdog

PC Health Monitoring
CPU	Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN	Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment Thermal Control for fan connectors

Chassis
Form Factor	2U Rackmountable
Model	CSE-227GTS-R2K63P

Dimensions
Height	3.47" (88mm)
Width	17.6" (447mm)
Depth	29.9" (760mm)
Available Colors	Black

Drive Bays / Storage (per Node)
Hot-swap	2 front Hot-swap 2.5" U.2 NVMe Gen4 drive bays

Expansion Slots (per Node)
PCI-Express	2 PCI-E Gen 4 x16 external slots 1 PCI-E Gen 4 x8 AIOM networking slot (or optional x16 AIOM w/ additional parts)

System Cooling
Fans	4 Hot-swap heavy duty 80mm PWM fans

Power Supply
2600W Redundant Power Supplies with PM Bus
Total Output Power and Input	2600W with Input 200-240Vac 2600W with Input 200-240Vdc (for CQC only)
Dimension (W x H x L)	40 x 73.5 x 265 mm
+12V	Max: 216A / Min: 0A (200-240 Vac)
+12Vsb	Max: 4.5A / Min: 0A
Output Type	Gold Finger Connector
Certification (Pending)	Titanium Level

Operating Environment
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Parts List - (Items Included)
	Part Number	Qty	Description
Motherboard / Chassis	MBD-H12SSG-ANP6   CSE-227GTS-R2K63P	2   1	Super H12SSG-ANP6 Motherboard   2U chassis
Cable 1	CBL-CDAT-1056	1	2x5,PH2.54 to 2x5,PH2.54,7cm,28AWG,RoHS
Cable 2	CBL-PWCD-0376-IS	2	PWCD,US,IEC60320 C19 TO C20,940mm (3ft),14AWG,15A,250V,Black
Cable 3	CBL-PWEX-1026	2	GPU,2x4F/RA/CPU to 2x4F/CPU,P4.2, 35CM, 17AWG, 8A/pin,RoHS
Cable 4	CBL-PWEX-1042	4	GPU,2x4F/CPU to 2x4F/CPU,P4.2, 50CM,16AWG,10A/pin, -40~105C,
Cable 5	CBL-PWEX-1093-36	2	MicroFit,2x2, P3.0,F to MicroFit,2x2,P3.0,F,36CM,10A/pin
Cable 6	CBL-PWEX-1257	1	2x4,PH3.0 to 2x4,PH3.0,7CM,4A,22AWG,RoHS
Cable 7	CBL-SAST-1201LPB-85	2	3x SlimlineLP x8 (STR) to 3x SlimlineLP x8 (STR),BNDL,F
Cable 8	CBL-SAST-1209F-85	2	SlimSAS (x8 STR to x8 STR),9CM,FFC,FOLD,85 OHM,RoHS
Cable 9	CBL-SAST-1235-85	2	Slimline x8 (STR) to Slimline x8 (STR),INT,35CM,85 OHM
Cable 10	CBL-SAST-1289LP-85	2	SlimsasLP x8 (STR) to SlimsasLP x8 (STR),FOLD,85 OHM,Ro
Cable 11	CBL-SAST-1295LP-85	2	SlimSASLP x8 (RA) to SlimSASLP x8 (STR),8CM,85 OHM,R
Fan Holder	MCP-220-82620-0N	2	Dual 2.5 NVMe4 Drive Kit for 216B/826B/417B/846X/847B,RoHS
Air Shroud	MCP-310-22702-0B	2	Mylar air shroud sets H12SSG-AN6 for SC227G(2x GPU)
Riser Card	RSC-GB-66G4	2	1U Rear LHS GPU Riser card with twoPCI-E4.0x16slots,HF,R
Riser Card	RSC-GF-66G4	2	1U Front LHS GPU Riser card with two PCI-E 4.0x16slotsHF
Riser Card	RSC-GF-6G4	2	1U Front LHS GPU Riser card with onePCI-E4.0x16slot,HF,R
Control Board	CSE-C-P2N2FG4-P1A-A	1	Gen4 2xNVMe power and fan control board A
Control Board	CSE-C-P2N2FG4-P1A-B	1	Gen4 2xNVMe power and fan control board B
Software	SFT-OOB-LIC	2	License key for enabling OOB BIOS management
Heatsink / Retention	SNK-P0062P	2	1U Passive CPU Heat Sink for AMD Socket SP3 Processors
*Power Supply	PWS-2K63A-1R	2	1U 2600Wredundant single outpupowersupply with wide range in
*Cable 12	CBL-PWEX-1251	2	FAN,2x4 to 2x 1x4 and 1x4,5A/pin,42.5CM,22/24AWG
*Cable 13	CBL-PWEX-1252	2	FAN,2x4 to 2x 1x4 and 1x4,5A/pin,58CM,22/24AWG
*FAN 1	FAN-0219L4	4	80x80x80 mm, 14.2K-15K RPM Counter-rotating, Hot-swappable F
*Front Panel	FPB-FP827BR	1	2U BigTwin front control board - right side
*Rail Set	MCP-290-00144-0N	1	2U fixed rail set, quick release, default for 2,3U 17.6"W
*Front Panel	FPB-FP827BR	1	2U BigTwin front control board - right side
*Rail Set	MCP-290-00145-0N	1	Left fixed rail (quick) for 2U 17.6";W chassis
*Rail Set	MCP-290-00146-0N	1	Right fixed rail (quick) for 2U 17.6";W chassis
Notes: Parts with * are inside the chassis Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.

Optional Parts List
	Part Number	Qty	Description
TPM security module	AOM-TPM-9671V	-	TPM 1.2 module (Vertical) with Infineon 9671
	AOM-TPM-9670V	-	TPM 2.0 module (Vertical) with Infineon 9670
Global Services & Support	OS4HR3/2/1   OSNBD3/2/1>	-   -	3/2/1-year onsite 24x7x4 service   3/2/1-year onsite NBD service
Hide Parts List