Intel 3DXPoint P4800X 750G NVMePCIe3.0 2.5" 15mm 60DWPD - SSDPE21M750GA
Capacity: 750 GB BUS: PCI-E 3.0 4x Format: U.2 Speed: 2500 MBps (read) / 2200 MBps (write) Lifetime: 60 DWPD Technology: 3D XPoint
Interested in purchasing more units? Request an individual B2B offer for these products.
| Product code | 225.158219 |
|---|---|
| Part number | SSDPE21M750GA |
| Supermicro Part No. | HDS-IUN0-SSDPE21M750GAX |
| Manufacturer | Intel |
| Availability | Not in stock |
| Warranty | 60 months |
| Weight | 0.4 kg |
| The price includes all legal fees | |
Detailed information
Characteristics
SSDs, or disks with flash memories don't yet reach such high capacities as traditional HDDs. Their undeniable advantages are however their high read/write speed and lower latency. Their lifetimes are basically equal to those of traditional hard drives nowadays, however, it's important to choose the correct key DWPD value (no. of rewrites of the total capacity of the disk within one day).
Interface
When choosing a hard drive it's important to consider the choice of SATA, SAS, or NVMe disks. SATA and SAS disks are intended for both HDDs and SSDs and differ in their theoretical transfer speeds. NVMe disks are flash-based only and as such reach much higher read/write numbers and are also characterized by their very low latency.
Speed and Capacity
A key parameter in terms of hard drives is their RPM, which ranges between 5400 and 15000. This directly influences the speed of the drive and with that, its price. Today, more and more HDDs are being replaced by SSD solutions. SSDs are many times faster and their prices are starting to get closer to those of traditional HDDs. Their access times are also often faster and there's no wear when reading from the flash memory. The newest standard, NVMe, increases the quality of disks with flash memories even more and more hard drive manufacturers are starting to use it.
Product Specifications
|
Performance Specifications |
|
|
Sequential Bandwidth - 100% Read (up to) |
2500 MB/s |
|
Sequential Bandwidth - 100% Write (up to) |
2200 MB/s |
|
Random Read (100% Span) |
550000 IOPS (4K Blocks) |
|
Random Write (100% Span) |
550000 IOPS (4K Blocks) |
|
Power - Active |
18 W |
|
Power - Idle |
6 W |
|
Reliability |
|
|
Vibration - Operating |
2.17 GRMS |
|
Vibration - Non-Operating |
3.13 GRMS |
|
Shock (Operating and Non-Operating) |
1000 G/0.5 msec |
|
Operating Temperature Range |
0°C to 70°C |
|
Operating Temperature (Maximum) |
70 °C |
|
Operating Temperature (Minimum) |
0 °C |
|
Endurance Rating (Lifetime Writes) |
41.0 PBW (30DWPD) | 82.0 PBW (60DWPD) |
|
Mean Time Between Failures (MTBF) |
2 million hours |
|
Uncorrectable Bit Error Rate (UBER) |
1 sector per 10^17 bits read |
|
Warranty Period |
5 yrs |
|
Supplemental Information |
|
|
Product Brief |
View now |
|
Package Specifications |
|
|
Form Factor |
U.2 15mm |
|
Interface |
PCIe 3.0 x4 | NVMe |
|
Advanced Technologies |
|
|
Enhanced Power Loss Data Protection |
Yes |
|
Hardware Encryption |
AES 256 bit |
|
High Endurance Technology (HET) |
Yes |
|
Temperature Monitoring and Logging |
Yes |
|
End-to-End Data Protection |
Yes |
|
Intel® Smart Response Technology |
No |
|
Intel® Rapid Start Technology |
No |
|
Intel® Remote Secure Erase |
No |
Parameters
| HDD type | U.2 |
|---|---|
| Capacity in GB | 750 |
| Read speed | 2500 |
| Write speed | 2200 |
| DWPD | 60 |
| Interface | PCI-E 3.0 4x |
